Tattoo

How to Make a Penguin Snow globe























Christmas Craft #7 Penguin Snow globe Ornament
Well here is the second most popular craft from Craft Day at school. We ended up running out of black pipe cleaners it was so popular. The idea is from Parents.com, I had to change it a bit to work with 120 kids. I know everyone likes a step by step tutorial so here it is:
Materials Required:
click on photo to see larger
I couldn't find 5 oz glasses like the original supply list called for. I did find "shooter" glasses at the Dollar Store so we used these instead.

I made a template for the kids to follow. You want to cut out a circle about 1/2 inch larger in diameter than the cup.

Then using pinking shears or decorative paper cutters, cut a nice scalloped edge all the way around.
Now the original instructions said to pierce the bottom of the cup with a tack,....well after cracking 4 cups in a row I gave up on that idea.
Thread your pony bead with your hanging thread and tie in a knot to make a loop.
Glue directly to the top of your cup with tacky glue.
While it is drying you can work on the penguins.
Take an orange pipe cleaner and cut in half. Now bend this in half.
Twist a bit together leaving the ends separate. These are your penguin feet.
Now take a full black pipe cleaner and wrap around a pencil nice and tight.
When you slide it off it should look like this.
Insert the orange pipe cleaner inside the black coil. About two coils from the top bend your orange pipe cleaner so it sticks out. This is your beak and those 2 coils at the top is the top of the head.
Take your white felt and cut a little oval. Glue on the belly of your penguin. The original instructions used a white pipe cleaner but I found it too fussy to stay in place.
Glue on some eyes.
Make a second penguin a bit smaller than the first. Cut your orange pipe cleaner about a 1/2 an inch shorter and scrunch down the black coil a bit.
I also used smaller eyes on this one.
Now the original ornament had a North Pole sign with the penguins but with these "shooter" cups I did not have the space for it.
Glue your penguins to the cardstock circle.
I have mine close together because of the size of the cup.
Add some loose sequins on the paper. I didn't glue these down as I wanted it to be more like a snow globe.
Run a bead of glue all around the bottom edge of the cup.
Put into place over the penguins.
The original instructions called for a silver pipe cleaner around the bottom. I find those metallic pipe cleaners difficult to glue for kids so we used a white pipe cleaner.
Measure how long you need then cut to size, leave a little extra to twist together in a circle. Run some glue around the base of the cup and then slide the pipe cleaner down.
We used some glitter glue to add some sparkle to the pipe cleaner.
Let the glue dry fully and then you have a cute little snow globe ornament.
Give it a try.
see you next time
gail

No comments:

Post a Comment