Tattoo
Showing posts with label paper mache. Show all posts
Showing posts with label paper mache. Show all posts

Paper Mache Puppets






Aren't these great.  I especially love Jeff's (age 7) mutant one eyed attack chicken........









and Ryan's (age 10) blue lizard man!



It's great when a project gets done.  This one took a few days so the kids were glad to get it completed.

I first did paper mache puppets with my daughter's Grade 3 class for Halloween. ( that was 5 years ago)  We made spooky monsters and creatures, because it's Halloween I find the kids can just let their imagination soar when coming up with ideas.


Materials Required:

- sticks
- paper towels
- foil
- white glue
- Kleenex
- recycled container to hold glue mixture
- paint
- mod podge (optional)
- string
- scrap fabric
- odds and ends to embellish with



Take a stick, about pencil length and wrap a ball of foil on the end.



Mix up a glue/water solution at a 1 to 1 ratio.

Using paper towel strips dipped in the mixture start wrapping the head.  You want to cross over strips randomly, smooth it down and make it tight, and wrap some strips down onto the stick to hold the head in place.

Every once and a while use a dry strip..it will soak up the excess glue.

Put some Kleenex in the glue mixture and use this to mold your facial details.



Set your heads aside to dry for a few days and turn them once and a while.


Paint with acrylic or tempera paint.





If you want you can add a coat of mod podge for a nice shine.






All our puppet heads ready to go!




Tie a length of string around the neck for the arms, you could use yarn, anything flexible.





Cut a rectangle from some scrap cloth. you want it to be twice as long as you want the puppet's body to be and as wide as you want it's arms to be.





Take your length of fabric and fold in middle, then fold lengthwise and cut a notch in the center of your fabric.

This is where the head will go.





Slide stick into hole and pull in string, lay it out like this.





Wrap stick with some stuffing, scrap fabric, whatever is around to add some bulk to your body.

You can trim your fabric a bit too at this time getting a triangular type shape.








Now you want to add some glue at the neck, under the hands, and down the sides.  You can use tacky glue, I used hot glue.

Alternatively you could also sew the fabric in these places.

I thought I took pictures of "making the hands" but I guess I forgot.  Cut out 4 hands, use felt, craft foam, fabric.  Lay one down, add a drop of glue, place end of one string arm in the glue and then place another hand on top sandwiching in the string.  Repeat for other hand.






You can add feathers, hair, and embellishments at this point.

This is the back of Jeff's chicken puppet.

Attach a string, I'm using fishing line, around the neck of the puppet.







Find 2 sticks from outside that are about 6 inches or so and cross them in the middle, wind some pipe cleaner around them and then secure in place with hockey tape or duct tape.







Near the end  of one of the sticks tie on a small loop made from pipe cleaner, tape down.



Now attach string from your head to the center cross of your sticks.


Measure out a length of string that is double the length from where your puppet's hand is to the sticks, an extra hand comes in handy here, someone to hold the puppet upright while you are measuring.

Tie one end of your string on one hand, here I threaded one end onto a big needle and feed it thru the felt hand, knot it tightly a few times.

Feed the other end of the string thru the loop you made on your stick and down to the other hand, attach in same manner.




Now your puppets are ready.

Here Mutant Chicken and Lizard Man
battle for world domination!





See you next time.

The Figure - A Sculptural Project





In the course of teaching Art at some point you will address the importance of the figure.

Now you can sketch the figure, paint it, pastel it, .....deal with it in a variety of ways but a sculptural project allows kids to really appreciate the way the figure occupies/moves in its space.

I'm always looking for sculptural/3D projects so this is what I came up with.  It is paper mache on a wire armature that is easy enough for the kids to construct and utilizes recyclables.




Now the inspiration for this project is Mario Armengol's "Family of Man" sculptures.  They were first exhibited in Expo '67 and since then have resided in Calgary.  We are lucky to have them.




I grew up with these statues and they have always fascinated me.

Whenever I am downtown I try to spend some time appreciating them, .........their size, they way they occupy their space, their relation to one another, their story.
My kids love them to and are always trying to figure what's going on between the figures.



MATERIALS REQUIRED:
- recycled tuna can
- awl
- wire
- duct tape
- paper towel
- wax paper
- white school glue
- acrylic paint



Before you start your sculpture you may want to discuss the way the figure moves in space.

Discuss different positions the figure may take, you may also want to have the kids sketch out some figures to plan out their sculpture.



Take your tuna can and poke 2 holes thru the bottom with your awl. This needs to be done by an adult.

Now I have a can opener that makes a "safe edge" when it cuts but you can always use some duct tape along the edge to cover the sharp edge.





For this project I used some wire I purchased from Wal mart.  I can't remember the gauge as the label is gone but it is soft enough to bend with your fingers but strong enough to hold the shape.  Take a piece about 18 inches or so. and bend in half.






Feed the 2 ends thru one of the holes.  Twist them together a few times and then bend them flat to the can.

Use a few pieces of duct tape to secure.

This will be underneath your sculpture so you won't see it.








Do the same with a second piece of wire.  It should look like this.



Twist the 2 wires together to form the legs and the torso.

Take a wire that is about 12 inches, bend in half and twist the ends onto the top of your torso.  This will be an arm.

Make a second arm and bend your wire armature into the position you want your figure to take.






For the head make a loop in a wire about 6 inches long and twist into place at the top of the torso.






Add a few pieces of duct tape around the torso to hold it all together.






Take some strips of paper towel and a glue/water mix (1 to1 ratio) and begin covering the armature.

Add additional strips to the areas where you want more shape. Just try to keep the mache tight on the armature.  You don't want it too bulky that might lead to the sculpture collapsing before it can dry.






For the head make a ball of mache and then wind some strips around it to adhere to the wire loop.

I left the wire exposed for the hands as I liked the look of it.







Add some strips to the base to cover the tuna can.




Let dry.  It takes about 2 days.

Paint with acrylic paint. I wanted a metallic look so I first painted the whole thing black.






I then dry brushed on some bronze paint letting some of the black show thru.  I left the face black like it was in shadow.

I also left the base black to contrast with the figure.




That's it.

You could do a whole set similar to the "Family of Man" or have each student select one figure from series and then exhibit them together.


My plan is to do this project with Grade 5 as soon as I have collected enough cans.

See you soon with another art adventure.

Paper Mache Birds


I guess I have a bird theme going here.


These are some cute paper mache birds we made recently.















They have wire feet which allow you to clamp them on an edge like a flowerpot or piece of driftwood or have them free standing.










MATERIALS REQUIRED:
- newspaper
- tape
- paper towel
-  reg. white school and tacky glue
- water and recycled container
- thin cardboard from a cereal box
- wax paper
- acrylic or tempera paint
- fine markers
- sealer like Mod Podge (optional)
- med. gauge wire
- embroidery thread or yarn



Take a quarter sheet of newspaper and crush into a pear shape.















Tape into place.  You can twist out a beak shape, click on this photo to enlarge to see this.








Cut some paper towel into strips about 1/2 an inch wide or so.  Pour some white school glue into a recycled container and add water in a 1 to 1 ratio. Mix well. Dip the strips into the glue mixture and start covering your bird.

With paper mache you want to overlap your strips for strength and smooth them down as you go.  Use a few dry strips to soak up excess glue.  That way your bird will take less time to dry you just want it moist not sopping.


Leave to dry in a warm place overnight...turn once to ensure even drying.


Out of thin cardboard from a cereal or cracker box cut out a wing shape...I used a teardrop shape.  Cut out a tail shape as well.









Take the cardboard shapes and cover in a coat of paper mache.









Once they are covered attach to the bird with overlapping strips.  While the shapes are moist you can curl your wings if you wish.


Leave to dry.

Paint with acrylic or tempera.









We used a basecoat first and then added additional color on top.














For the feather and eye detail you can either paint it in with a fine paintbrush or use fine sharpies after the paint has dried.

Younger kids to better with the markers.





If you want a shiny coat you can add a coat of mod podge but you might want to wait until after you add the legs.  This way it can stand up while drying.











To make the feet take piece of wire about 16 inches or so.  I don't what gauge this wire is as the label was missing but it's soft enough to bend with your fingers but firm enough to hold the shape without collapsing.

Make a foot shape with 4 toes and then twist the 2 ends of the wire together to form the leg.













Trim them down and bend in the knees.  Remember a bird's knee bends backwards.













I like the look of the silver foot but I wanted to add some color to the legs so we wrapped them with embroidery thread.  You could also use yarn.  Take the end of the thread and loosely wrap from the top of the leg down, double back and wrap tightly now.

When you reach the top knot off.







Using an awl or a knitting needle punch holes for the legs.










Put some tacky glue on them.












Push the leg thru the glue into the hole (remember the knees are backwards).

Add some more glue if needed.











Let dry. 











Here is the one my 7yr old made.













That's it.They look pretty realistic once the legs are on.


For those of you wondering where all the links went from my sidebar I finally had time to compile some pages and they are available at the top under my banner.
I now see all the gaps I need to fill so I hope to add many more lessons/projects.