Here is a way you or the kids can make some Fall leaves to have on display in the house.
There are two methods, The darker leaves made with a pastel resist technique ( this photo does not give them justice they are much more colorful ), and the good old Coffee filter type.
I'll run you thru both....let's get started.
Materials needed: brown paper bags or package paper, pastels, dark brown tempera or acrylic paint, paintbrush, water, glue, a bare branch, scissors
First cut your paper bags or package paper into pieces. I cut mine about the size of 2 good sized leaves. I cut the paper into pieces so the kids can handle it better and don't get overwhelmed with trying to color in a big piece.
Next we get out the pastels in Fall colors and start coloring. You want a fairly good coating of color, otherwise it won't show up under the paint.
Color all your pieces. We did about 6.
Now take your pastel colored paper and crumple it. You may have to do it a couple of times. You want lots of creases. Sometimes if your paper is really heavy it helps to dampen it slightly with water and then crumple. If you get a few holes that's OK it just adds to the look. You don't want alot of tearing though.
Flatten out your pieces of paper. Take your paint, you want a darker shade of brown than the paper, and water it down a bit. We used acrylic because I like the intense color but you can easily use tempera as well.
Paint all your pieces and set them aside to dry.
When dry you want to cut out some leaf shapes. You could use a template for tracing if you wish. DLTK has a good one.
Put some glue on the back of the leaf where the stem would be and place on your bare branch.
You can use clothespins to hold the leaf in place until the glue dries.
When dry enjoy your new Fall decoration.
For the Coffee filter leaves you need the following:
coffee filters, washable markers in fall colors, glue, water, wax paper, paintbrush, scissors, bare branch
Take your coffee filters and color with markers. You don't have to be too thorough as the marker is going to saturate the filter in the next step. You can have white areas that's OK.
Take your white glue and pour a bit into a recycled marg. or yogurt container. Add some water, about a 1:1 ratio.
Place your colored filters on some wax paper and paint on the glue/water mixture. You'll find the colors start running together immediately. Coat completely and let dry.
When dry cut out your leaf shapes and glue onto your bare branch like before. You can also cut leaves out of the wax paper you used. I found the marker seeped thru and it created a neat translucent effect.
A nice Fall display.
Incidentally, the boards we were working on for this project are the art boards I was describing in the last post. Truly indispensable, allow you to move your work while drying and protects your desk, kitchen table or where ever you craft.
see you later
gail
